J. Drasner & Co., Inc. Products
Home | Film Products | Chemical Additives | Case Studies | FAQ | About Bags | Contact Us

Lomel® 160

Ethylene Vinyl Acetate Copolymer Film

The Lomel® 160 line of plastic film and bags are derived from a family of ethylene vinyl acetate copolymer resins. The Lomel® 160 grade melts between 72°C and 76°C. These bags are suitable for packaging blended and pre-weighed additives used in mixing rubber and plastic compounds.

The Lomel® 160 film and bags are being used in a wide variety of rubber and plastics materials and exhibit excellent dispersability and compatibility.

The film and bags are made from FDA accepted resins and ingredients. They can be heat sealed and printed. Testing should be done to determine optimum sealing temperatures. Bags are available as individual lay flats or on rolls. Custom sizes can be produced at the customer’s request.


  
  Material Safety Data Sheet (21K PDF)*
  
Typical Film Properties
Lomel® 160
Film Thickness 2.25 mils
Melting Point 72°-76°C
Utlimate Tensile MD
TD
4,100 psi
3,800 psi
Elongation MD
TD
500%
600%
1% Secant Modulus MD
TD
4,400 psi
4,600 psi
Tear Strength MD
TD
60 g/mil
180 g/mil

* Download the Material Safety Data Sheets in PDF format. Viewing and printing them requires the free Adobe Reader program, which you might already have. If you don't have it, download the Adobe Reader for free.

J. Drasner & Co., Inc. J. Drasner & Co., Inc.
23600 Mercantile Rd., Unit I • Beachwood, OH  44122 • USA
Phone: (216) 765-8805 • Fax: (216) 765-8816
Email: bags@jdrasner.com
 
© J. Drasner & Co., Inc.
Powered By Dynamics Online, Inc.
Top