J. Drasner & Co., Inc. Products
Home | Film Products | Chemical Additives | Case Studies | FAQ | About Bags | Contact Us

Lomel® 180

18% Ethylene Vinyl Acetate Copolymer Film

The Lomel® 180 line of plastic film and bags are derived from a family of ethylene vinyl acetate copolymer resins. The Lomel® 180 grade melts between 83°C and 86°C. These bags are suitable for packaging blended and pre-weighed additives used in mixing rubber and plastic compounds.

The Lomel® 180 film and bags are being used in a wide variety of rubber and plastic materials and exhibit excellent dispersability and compatibility.

The film and bags are made from FDA accepted resins and ingredients. They can be heat sealed and printed. Testing should be done to determine optimum sealing temperatures. Bags are available as individual lay flats or on rolls. Custom sizes can be produced at the customer's request.


  
  Material Safety Data Sheet (21K PDF)*
  
Typical Film Properties
Lomel® 180
Film Thickness 2.0 mils
Melting Point 83°-86°C
Density 0.9449 g/cm3
Tensile Strength 4,000 psi
1% Secant Modulus 7,800 psi
Elmendorf Tear MD
TD
50 g/mil
200 g/mil

* Download the Material Safety Data Sheets in PDF format. Viewing and printing them requires the free Adobe Reader program, which you might already have. If you don't have it, download the Adobe Reader for free.

J. Drasner & Co., Inc. J. Drasner & Co., Inc.
23600 Mercantile Rd., Unit I • Beachwood, OH  44122 • USA
Phone: (216) 765-8805 • Fax: (216) 765-8816
Email: bags@jdrasner.com
 
© J. Drasner & Co., Inc.
Powered By Dynamics Online, Inc.
Top