J. Drasner & Co., Inc. Products
Home | Film Products | Chemical Additives | Case Studies | Terms and Conditions | FAQ | About Bags | Contact Us

Lomel® 210

Ethylene Vinyl Acetate Copolymer Film

The Lomel® 210 line of plastic film and bags are derived from a family of ethylene vinyl acetate copolymer resins. The Lomel® 210 grade melts between 97°C and 102°C. These bags are suitable for packaging blended and pre-weighed additives used in mixing rubber and plastic compounds.

The Lomel® 210 film and bags are being used in a wide variety of rubber materials and exhibit excellent dispersability and compatibility.

The film and bags are made from FDA accepted resins and ingredients. They can be heat sealed and printed. Testing should be done to determine optimum sealing temperatures. Bags are available as individual lay flats or on rolls. Custom sizes can be produced at the customer's request.

  Material Safety Data Sheet (21K PDF)*
Typical Film Properties
Lomel® 210
Film Thickness 2.0 mils
Melting Point 97°-102°C
Density 0.925 g/cm3
Tensile MD
17,000 psi
20,000 psi
Elongation MD
1% Secant Modulus MD
15,500 psi
17,000 psi

* Download the Material Safety Data Sheets in PDF format. Viewing and printing them requires the free Adobe Reader program, which you might already have. If you don't have it, download the Adobe Reader for free.

J. Drasner & Co., Inc. J. Drasner & Co., Inc. / HB Chemical
1665 Enterprise Parkway, Twinsburg, OH 44087 • USA
Phone: (800) 991-2436
Email: customerservice@hbchemical.com
© J. Drasner & Co., Inc.
Powered By Dynamics Online, Inc.